Poditec ceramic dome bit 6 mm Grosse

General product overview

The Poditec ceramic dome bit 6 mm is a professional ceramic rotary bit developed for controlled work on thickened nail plates. It is primarily used for thick to very thick nails, including mycotic nails, and may also be used on artificial nail materials when clinically indicated. Ceramic maintains an efficient cutting action while typically improving comfort due to a more favourable vibration and heat profile. The 6 mm dome shape is a versatile format for stable, controlled surface work, provided the appropriate cut is selected.

Benefits

• Cutting action suitable for thinning thickened and mycotic nails
• Lower heat build-up and reduced vibration for improved treatment comfort
• Significantly lighter than a comparable carbide bit for better in-hand balance
• 6 mm dome shape for stable and even work on the nail surface
• Available in fine, medium and coarse cut depending on the required cutting capacity
• Easier cleaning and practical daily handling
• Working speed: approximately 15,000 rpm (to be adjusted to your handpiece and technique)

Who it is for, typical uses and working areas

• Specialised pedicure and podiatrist
• Thickened nails and mycotic nails
• Artificial nails when clinically indicated and according to your protocol
• Dry removal of semi-permanent polish using a controlled technique
• Work on the nail plate with controlled pressure and contact time

Directions for use

1. Select the cut according to the indication: medium for thick, hard nails; coarse for very thick, hard nails; fine for more delicate work and controlled finishing.
2. Insert the bit correctly into the handpiece (fully seated, properly locked).
3. Set the speed according to your routine, with around 15,000 rpm as a reference when appropriate.
4. Work without excessive pressure, using short, regular passes.
5. If sensitivity or heat is felt, reduce pressure, shorten passes and re-evaluate the selected cut.
6. Clean and disinfect the bit according to your hygiene protocol, then sterilise if required.

Precautions

• For professional use by trained practitioners
• Do not force: excessive pressure increases heat and reduces precision
• Respect the speed limits of your device and the packaging information if provided
• Check the bit is correctly seated before use
• Follow strict hygiene: cleaning, disinfection and sterilisation if required
• Use a synthetic brush for cleaning; avoid aggressive metal brushes
• In an ultrasonic bath, use a bit holder to prevent impacts and premature wear

Why Podialux recommends this product

Podialux recommends this bit because it offers efficient thinning on thickened nails while helping limit common discomfort linked to heat and vibration. The 6 mm dome shape supports regular surface work, and the different cuts make it possible to select the right version for the specific nail condition and the expected result.

Benefits of buying from Podialux

Buying from Podialux helps secure the right variant selection with a professional-use approach and consistent references. This reduces the risk of choosing an unsuitable bit and supports stable, repeatable results in daily practice.