Poditec Diamond Ball Burr 1.0mm

General product overview

The Poditec medium-grit diamond ball burr is a precision burr intended for professional foot care procedures where consistent control over abrasion is essential. The ball geometry helps you approach small areas with a rounded contact, supporting fine, progressive movements and maintaining clear control in confined zones. Medium grit is suited to situations that require both effectiveness and predictability, without shifting into unnecessarily aggressive abrasion. With multiple diameters available, you can select the most appropriate head size based on access, visibility, and the degree of detail required by the procedure.

Product benefits

• Ball shape for rounded contact and progressive control
• Medium grit for a practical balance between cutting efficiency and precision
• Targeted work for corns and grooves
• Diameter options by variant: 1.0 mm, 1.4 mm, 2.3 mm
• Suitable for procedures requiring controlled abrasion in small areas

Indications and uses

• Targeted work on corns (according to your protocol and clinical approach)
• Cleaning and refining grooves where precision is required
• Controlled finishing on localised hyperkeratotic areas when medium grit is appropriate
• Precision work where a smaller head size improves access and visibility

Directions for use

1. Select the diameter for the area: 1.0 mm for very fine access, 1.4 mm as a versatile option, 2.3 mm for broader areas.
2. Check the burr condition before use (diamond surface, no visible defects).
3. Fit the burr correctly in your handpiece and ensure secure locking.
4. Work with short, controlled contact points, without excessive pressure, keeping a clear view of the area.
5. Proceed in stages and reassess regularly, especially around sensitive zones and grooves.
6. After use, apply your practice hygiene protocol before any reuse.

Precautions for use

• Do not compensate for reduced efficiency with excessive pressure: increased heat, reduced control, and patient discomfort risk.
• Replace the burr when performance drops noticeably or the surface no longer works evenly.
• For professional use only, within good practice standards and scope of competence.
• Match diameter and technique to the area, access constraints, and tissue sensitivity.

Why Podialux recommends the Poditec diamond ball burr (medium grit)

Podialux recommends this burr for situations where professionals need a calm, precise, and highly controllable approach on small areas such as corns and grooves. The ball shape supports micro-step work with a rounded contact point, while medium grit remains effective without becoming unnecessarily aggressive. The available diameters make it easier to choose the right head size depending on access and the level of precision required.

Benefits of buying from Podialux

With Podialux, you can select the right variant while maintaining consistency across your instrumentation. The selection logic remains straightforward and professional: shape, grit, and diameter aligned with your working method. This reduces guesswork purchases and supports a more consistent day-to-day working experience.