Pear-shaped bur in GQSR carbide large cut Busch 6mm

Busch Tungsten Carbide Burs: In General

• They have a cutting action
• They are used on harder surfaces such as the thickened nail plate, corns, but also for removing calluses
• Tungsten carbides are stronger than their stainless steel counterparts.

The GQSR Carbide Pear Bur Busch: Its Actions

• It will thin thick to very thick nails
• The carbide bur with its cutting action will also treat hyperkeratosis
• Its GQSR teeth will allow modeling of silicone orthotics

Types of Busch Carbide Burs

To best assist you in choosing your bur according to your needs, here are some details below. Each bur will have a reference with letters and numbers: we draw your attention to these letters:

• Q cut: The bur has vertical lines This is used for nail treatment, hyperkeratosis, and orthotic modeling. You can choose between the 'Large' GQSR cut or the 'Medium' GQSR cut.
• X cut: The bur has diagonal, wavy lines This will treat thick nails. In this model, you will have different cuts:
• SGX cut will be used for very thick and hard nails
• GX cut will be used for thick and hard nails
• X cut will be used for thick nails and their contours
• FX cut is a cut for the delicate treatment of the nail plate.

Some Safety and Hygiene Tips for Busch Burs

• Ensure the bur is properly inserted into the milling machine handpiece
• Do not exceed the maximum speed indicated on the packaging
• Follow the hygiene steps carefully: Pre-disinfection; disinfection; sterilization
• Never brush the bur with a copper brush but with a synthetic brush
• During disinfection in an ultrasonic device, ensure not to place the burs freely in the ultrasonic device. Place the burs in a bur holder (such as Steri-Safe)
• Regardless of the product used for disinfecting the burs, always follow the dosage and soaking time specified on the product