Hard composite resin Podocomp D 5g

Reference: txie022

Delivery under 48 hours
Secured payment
Satisfied or refunded

The Podocomp D resin is used in orthonyxia for curvature locking, but also for decompression at the distal groove. It will also be possible to use Podocomp D for sliding or fixed blocks. The Podocomp D resin is transparent and is packaged in a syringe. In order for the resin to become hard, it must be photopolymerized with a led lamp.

More info

The advantage of Podocomp D resin

Its transparency will allow to monitor the reconstruction of the nail but also during the realization of sliding blocks, it will be easy to see the titanium wire in the resin.

Required Material for Realization

Podoprimer (Photopolymerize for 10 seconds)
Podocomp D (photopolymerize for 40-60 seconds)
Brush holder + disposable brush tip
Polimerizing lamp
Podocomp Dry

Advice

Store the syringe at a temperature between 2C° and 25C°
Do not put in the fridge
Close directly after use, do not leave the syringe open during photopolymerization: Your syringe would no longer be usable.
Do not use after the expiration date.

Composition

Resinous matrix: Diurethandimethacrylate, Iso-propyliden-bis (2(3) – Hydroxide-3(2) -4 (phenoxy)propyl) – bis(methacrylate) (Bis-GMA)1,4 Buthandioldimethacrylat. Total load content: 75% by weight (53% by volume) – Glass loads: Average size of 0.7mm. Highly dispersed silica dioxide: Average particle size of 0.04 mm

You don't know the practice of photopolymerization? Podialux organizes training. Do not hesitate to go to the category for more information.

Data sheet

Marque	Podocomp
Weight	Presented in syringe
Sèchage	Hardens after photopolymerization
Indications	Ideal for orthonyxia and onychoplasty.
Précautions	Keep between 2°C and 25°C.
Poids	5 grams