Compo Flow Liquid Resin Syringe of 2 gr

Reference: txie019

Delivery under 48 hours
Secured payment
Satisfied or refunded

The Compo Flow is a photopolymerizable fluid composite. It is perfectly indicated in orthonyxia for packing. The composite is also recommended for the advance preparation of sliding blocks for the method with titanium wire. The Compo Flow can also assist with nail fissures. The liquid resin is presented in a syringe with 5 needle-tips.

More info

Necessary equipment for using Compo Flow

Unibond (Photopolymerize primer for 10-20 seconds)
Compo Flow with a needle-tip (Photopolymerize for 30 seconds)
Brush holder with a brush tip
Polymerization lamp
Degreaser (Nail Repair cleaner or Podocomp Dry)
Titanium wire or Tunnelers if preparing sliding blocks in advance.

Storage and advice regarding Compo Flow

Store the syringe at a temperature not exceeding 25°C
Do not refrigerate
It is recommended to protect the syringe from sunlight.
Close immediately after use, do not leave the syringe open during photopolymerization: Your syringe would no longer be usable.
Before disinfecting your needle tips, insert a titanium wire or a staple tip to prevent the resin from drying.
Do not use after the expiration date.

Composition of Compo Flow

Based on urethane dimethacrylate resin – Inorganic filler particles <1.0mm. The total filler content is 62% by weight and 48% by volume. Radiopaque (150% aluminum)

Data sheet

Marque	R&S
Matière	Fluid composite
Weight	Presented in a 2 gram syringe + 5 needle tips
Particularité	Photopolymerizable
Indications	Ideal for wicking, cracked nails or preparing studs in advance.
Poids	2 grams