Liquid Resin Compo Flow Syringe of 2 grams

Reference: txie019

Delivery under 48 hours
Secured payment
Satisfied or refunded

The Compo Flow is a fluid photopolymerizable composite. It is perfectly suitable for dressing in orthonyxia. The composite will also be recommended for advanced preparation of sliding blocks for the method with titanium wire. The Compo Flow can also help for ungual fissures. The liquid resin is presented in a syringe with 5 needle tips.

More info

Equipment needed for using Compo Flow

Unibond (Photopolymerize Primer between 10-20 seconds)
Compo Flow with a needle-tip (Photopolymerize for 30 seconds)
Brush holder with a brush-tip
Polishing lamp
Degreaser (Nail Repair cleaner or Podocomp Dry)
Titanium wire or Tunnelers if preparation of sliding blocks in advance.

Preservation and advice regarding Compo Flow

Keep the syringe at a temperature not exceeding 25c°
Do not put in the fridge
It is recommended to protect the syringe from sunlight.
Close directly after use, do not leave the syringe open during photopolymerization: Your syringe would no longer be usable.
Before disinfecting your needle tip, slide a titanium wire or a staple tip to prevent the resin from drying.
Do not use after the expiration date.

Composition of Compo Flow

Based on urethane dimethacrylate resin - Inorganic filler particles <1.0mm. The total filler content is 62% by weight and 48% by volume. Radiopaque (150% aluminum)

Data sheet

Marque	R&S
Matière	Fluid composite
Weight	Presented in a 2 gram syringe + 5 needle tips
Particularité	Photopolymerizable
Indications	Ideal for wicking, cracked nails or preparing studs in advance.
Poids	2 grams