Poditec ceramic conical bit 4 mm Grosse

General product overview

This 4 mm ceramic conical bit is developed for targeted work on nail contours. Where a dome shape is typically used for broader surface work, a conical shape is better suited to “line and edge” work: it follows curves, supports transition zones and enables precise correction on irregular nails. In the context of mycosis and deformities, the key benefit is clean, progressive work with good control of the contact point. On gel, the high abrasive power helps reduce and shape material efficiently, limiting the need to repeatedly pass over the same area.

Benefits

• Conical 4 mm shape for precise work on contours and narrow areas
• Targeted shaping on deformed nails or nails affected by mycosis (depending on indication)
• High abrasive power suitable for gel and efficient material work
• Available in fine, medium and coarse cut to match cutting capacity to the task
• Ceramic: professional use with a stable feel and easy daily maintenance

Indications and typical uses

• Specialised pedicure and podiatrist
• Work on the edges, contours and transition zones of the nail plate
• Local correction and shaping on deformed nails
• Contour work on nails affected by mycosis according to indication and protocol
• Gel work for shaping or material reduction with control

Directions for use

1. Select the variant: fine cut for finishing and delicate work, medium cut for general contour work with higher efficiency, coarse cut for denser material, especially gel, when faster progress is needed.
2. Insert the bit into the handpiece and ensure it is correctly locked.
3. Set the speed according to your device, with approximately 20,000 rpm as the indicated reference.
4. Work in short, regular passes, keeping contact controlled on the target area without applying pressure.
5. If heat or sensitivity is felt, reduce pressure, shorten passes and re-evaluate the selected cut.
6. Clean and disinfect according to your protocol, then sterilise if required.

Precautions

• For use by trained professionals with experience in rotary techniques
• Avoid pressure: let the cut do the work, not force
• Respect the speed limits of your device and any packaging information provided
• Always check the bit is correctly seated before use
• Hygiene: cleaning, disinfection, sterilisation if required by your organisation
• Use a synthetic brush for cleaning; avoid aggressive metal brushes
• In an ultrasonic bath, use a bit holder to limit impacts and wear

Why Podialux recommends this Poditec ceramic conical bit 4 mm

Podialux recommends this bit when contour precision is the priority and when work must remain confined to narrow areas without unnecessarily extending the treated surface. The 4 mm conical shape is relevant for deformed nails or nails affected by mycosis when correction must stay targeted. On gel, the high abrasive power delivers real efficiency, provided the appropriate cut is selected and the technique remains controlled.

Benefits of buying from Podialux

Buying from Podialux helps you select the right variant from the start, based on the material and the treatment objective. This reduces unnecessary purchases, avoids cut selection errors and supports consistent results in daily practice, especially where contour precision makes the difference.