Carbide Strawberry for Left-Handed X Medium Busch 4.5mm

Busch left-handed pear-shaped carbide bur X cut: its action

• It will treat the contours of thick and hard nails

Busch Tungsten carbide burs: In general

• They have the action of cutting
• They are also used on harder surfaces such as the thickened nail plate, corns, but also for the removal of calluses
• Tungsten carbides are stronger than their stainless steel variant.

The types of Busch carbide burs

To help you choose your bur according to your needs, here are some details. On each bur will be written a reference with letters and numbers: we draw your attention to these letters:

• The Q cut: The bur has vertical lines. It is used for nail treatment, for hyperkeratoses, and for orthosis modeling. You can choose between the GQSR 'Large' cut or the GQSR 'Medium' cut.
• The X cut: The bur has diagonal lines, in waves. This will treat thick nails. In this model, you will have different cuts:
• The SGX cut is used for very thick and hard nails
• The GX cut is used for thick and hard nails
• The X cut is used for thick nails and their contours
• The FX cut is a cut for the delicate treatment of the nail plate

Some safety and hygiene tips for Busch burs

• Make sure that the bur is properly inserted into the handpiece of the grinder
• Do not exceed the maximum speed indicated on the packaging
• Respect the steps of hygiene: pre-disinfection; disinfection; sterilization
• Never brush the bur with a copper brush but with a synthetic brush
• During disinfection in an ultrasonic device, make sure not to place the burs freely in the ultrasonic device. Place the burs in a bur holder (for example, Steri-Safe)
• Whatever product is used for the disinfection of the burs, always respect the dosage and soaking time indicated on the product

Podialux Training

At Podialux, we organize several sessions of continuing education, especially on milling techniques and burs. Do not hesitate to register to deepen your professional skills.