Strawberry Crack Medium Grain Busch 1.4 mm 2 pieces

Speed allowed by Busch milling cutters

On each package of Busch milling cutters is mentioned the speed at which it is recommended to work with.

For safety reasons, it is recommended not to exceed the maximum speed allowed.

Be careful! You will always need to adapt your speed according to your experience and the medical circumstances of the patient.

What are the characteristics of a diamond milling cutter

• They have an abrasive effect and different grains of hardness
• They can be used on the nail and the skin
• Their coating is finely ground diamond
• Diamond milling cutters are available in different shapes: This will depend on the application (example: a ball is for corns)
• Diamond milling cutters are available in different grains: This will depend on the surface to be treated.

Each shape of diamond milling cutter has its application

• The pears: for larger surfaces
• The balls: for the finishing of a corn or treatment of a starting corn. For the treatment of grooves
• The cracks: For the grooves
• The markers: For the grooves

Some safety and hygiene tips for Busch milling cutters

• Make sure that the milling cutter is properly inserted into the handpiece of the milling machine
• Do not exceed the maximum speed indicated on the packaging
• Respect the steps of hygiene: Pre-disinfection; disinfection; sterilization
• Never brush the milling cutter with a copper brush but with a synthetic brush.
• During the disinfection in an ultrasonic device, make sure not to freely place the milling cutters in the ultrasonic device. Place the milling cutters in a milling cutter holder ( Steri-Safe for example)
• Whatever the product used for the disinfection of milling cutters, always respect the dosage and soaking time indicated on the product.

Podialux offers continuous training, such as the training: Milling techniques and its milling cutters.